CNC Milling Machine Metal Process Machines Industrial CNC Vertical Metal Lathe

• After-sales Service: One-Year After-Sale Service
• Warranty: One-Year After-Sale Service
• Type: Vertical Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Double-tool Holder CNC Lathe
• Model NO.: HS series
• Power Source: Electric
• Controlling Mode: CNC
• Automatic Grade: Semiautomatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: CE
• Condition: New
• Max.Machining Diameter: 630
• Max.Height of Workpiece: H=5
• Transport Package: Wooden Case
• Specification: 2000*1370*2320mm
• Trademark: RICH
• Origin: Dalian, China
• Production Capacity: 100 Set Per Week

Product Description

CNC Milling Machine Metal Process Machines Industrial CNC Vertical Metal Lathe

Introduction of CNC High-speed Vertical Lathe:

CNC High Speed Vertical Turing Lathes are featured with high speed and high efficiency and they are used to machine various parts with high precision requirements.The table guideways are large ball bearings to satisfy the requirements on high speed cutting. In the transmission,it is equipped with two mechanical shifts.The main motor is AC Variable Frequency Drive or DC motor.The operational codes are standard international ones and only basic training is required  for the operation before the operator runs the machine independently.  

CNC system is optional with Siemens, Fanuc or Fagor.  

The four-position electrical tool post or standard turning tool clamper are available according to the type of ram.

 Product Paramenters

 

 

Specifications of CNC High-speed Vertical Lathe:
Specification	Unit	CKS5116	CKS5120	CKS5225
Table Diameter	mm	1250	1800	2250
Max. Machining Diameter	mm	1600	2000	2500
Max. Workpiece Height	mm	1250	1600	1600/2000
Max. Workpiece Weight	t	8(<=80rpm)	12(<=50rpm)	16/20
Arbor Section	mm	32x32	40x40	40x40
Max. Cutting Force of Railhead	KN	16	25	32
Max. Torque of Table	KNm	10	25	32
Table Speed, Steps		Stepless/Infinitely Variable
Range	r.min	2.5-400	2-250	1.6-200
Feed Range	mm/min	0.1-2000	0.1-2000	0.1-2000
Railhead Travel Horizontal	mm	-20-1000	-20~1250	-20~1250
Vertical	mm	800	1000	1000/1250
Rapid Traverse Rate of Railhead	mm/min	12000	10000	4000
Max. Travel of Crossrail	mm	1000	1200	1250/1650
Crossrail Positioning, Pitches	mm	125	200
Steps		8(9 Location)	6(7 Location)	-
Crossrail Travel Rate	mm/min	410	360	350
Main Motor Power	kw	30(AC)	55(DC)	55(DC)
Cross Rail Motor Power	kw	7.5	11	11
CNC System		Siemens 802D/FANUC Oi-TC
No. of Axes Controlled Simultaneously		2	2	2
Ram Section	mm	200/Type T	220/Type T	220/Type T

 

Precautions during use of CNC High-speed Vertical Lathe:

1. Before driving, pay attention to check the position of the handle and whether the claws are clamped to the workpiece.

2. Check the cleanliness of the CNC High-speed Vertical Lathe guide rail lubrication.

3. Check whether the signal light and the interlocking device are sensitive and reliable.

4. Check whether the moving parts enter the limit position and whether the screws are loosened before moving.

5. When the CNC High-speed Vertical Lathe table is not stopped, no mechanical speed change is allowed, but the stepless speed regulation part of the feed movement and the main movement can be adjusted at any time as needed.

6. When lifting the workpiece, 80 oil pump motors should be stopped first, so as to avoid the sudden increase of oil pressure when the lifting workpiece is unstable and damage the pressure gauge of the feedback valve.

7. Do not stop before the tool is withdrawn.

8. When the machine tool is packaged and stored for a long time, the exposed machined surface should be coated with anti-rust agent. If the oil seal period is exceeded, the oil seal should be re-sealed.