Horizontal CNC Boring and Milling Machine Boring Cutting CNC Machine

• Type: Horizontal Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Horizontal Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Power Source: Electric
• Controlling Mode: CNC
• Model NO.: TK61
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: CE
• Condition: New
• Boring Spindle Diameter: Φ130
• RAM Section: 380×400
• Transport Package: Wooden Packing
• Trademark: RICH
• Origin: Dalian, China
• Production Capacity: 100 Set Per Week

Product Description

Horizontal CNC Boring and Milling Machine Boring Cutting CNC Machine

Introduction of TK61 series CNC horizontal boring and milling machine:
  CNC Table Type Milling and Boring Machine,Boring Machine,which can slide parallel and perpendicular to the perpendicular to the CNC Table Type Milling and
  Boring Machine,Model TK6111/6113, is provided with rotary table,which can slide parallel and perpendicular to the column. The machine is provided with five axes control and capable of completion of multiple machining operations on multiple surfaces after one time workpiece setup. The machine is equipped with milling heads,tool magazine and tool changer,which effectively increase the machine application range.
 

TK61 series CNC horizontal boring and milling machine Structural Features:

1. T-shaped bed layout The worktable always moves on the horizontal bed, with sufficient rigidity and good precision retention; the spindle can be CNC fed 550mm, and the axial resistance is large, which can be used for strong cutting; PTFE guide rail plate, there are rolling elements on the side for guidance, the friction between the guide rails is small, and the positioning accuracy is high;

 2. X, Z coordinate guide rails are equipped with stainless steel pull-plate type protective cover, Y direction has accordion type protective cover, dustproof and waterproof protection guide rails;

 3. The rotary circular guide rail of the worktable adopts cast iron-PTFE guide rail plate, and the imported thrust bearing is installed inside for unloading, stable movement, high positioning accuracy, and the bearing capacity can reach 5000kg. Main shaft bearings and screw bearings are imported originals;

Each guide rail motion pair has an adjustable timing lubricating device to supply oil, which can ensure sufficient lubricating oil for each lubricating point;

4. Equipped with cooling device, water tray and screw-type chip conveyor; easy to remove chips;

Equipped with Siemens SINUMERIK 840D CNC system, AC spindle motor, AC feed servo motor and servo drive unit are imported original, advanced performance, safe and reliable

Specification/Model	Unit	TK6111	TK6112	TK6113
Spindle Diameter	mm	110	120	130
Spindle Taper		ISO 50	ISO 50	ISO 50
Spindle Speed	rpm	5-3000	5-3000	5-3000
Table Transversal Travel (Axis X)	mm	2000	2500	2500
Table Rotating (Axis B)		360°	360°	360°
Spindle Travel	mm	700	800	800
Max.Load of Table	kg	6000	10000	10000
Feed Rate of Axes X, Y and Z	mm/min	2-10000	2-12000	2-10000
Tool Magazine Capacity	pics	30-40	30-60	30-60